DEVIcomfort 100w/m2 DTIR-100 3.0m2 300W Underfloor Heating Mat
|Model||DEVIcomfort DTIR-100T-300W Mat|
3.0sqm 100watt per sqm heating mat for timber floors 0.5m wide and 6m long.
DEVIcomfort for Timber Floors is a thin heating mat specifically designed to be installed within a tile adhesive layer. It evenly warms the floor surface eliminating the cold chill associated with hard floor surfaces. It is ideal for tiles on a timber floor or parquet on concrete, and can be installed beneath other surfaces such as laminated floors and vinyl.
DEVIcomfort is a prefabricated, self adhesive mat with a thin heating cable ready mounted, all within 4mm thickness. It is an open mesh design allowing the tile adhesive to bond to an existing floor.
The mats are available in a range of sizes from 1-12 square metres. Each mat is 0.5 metres wide. For example, a 5 square metre mat is 0.5m wide and 10m long.
The heat output of this product can be regulated using a controller. Generally only one controller is needed for this product, however, for larger areas, one controller per 23m2 should be used.
There is a choice of wall mounted thermostats, with the most popular being the Devireg Touch.
This product can be used for Bathrooms/En-Suites and Kitchens. In fact, this system can be used in any room as long as the heating mat is covered by a flexible tile adhesive/self-levelling compound.
The luxury of a comfortable warm tiled floor, high standard of comfort, provides even heat across the floor surface, economical, no significant floor height increase, simple to install, guaranteed for 20 years, and gives you a dry floor with no mould.
|Cable construction||Twin conductor|
|Mat Length||6 m|
|Mat Type||Timber Base|
|Mat Width||0.5 m|
|No. of Mats||1|
|Rated Voltage||230 V|
|Thickness||3.7 - 4.0 mm|
Martin Breen, Dublin, Ireland
7 June 2018 11:33
an easy choice for the floor i needed heated
21 November 2017 16:41
Service was second to none. Helped me every way possible
Follow the step by step instructions below to install your DEVImat system. Example Instruction Step 1 Measure the room and draw a sketch to help you c...
Start by measuring the free surface area, and make a sketch of the room similar to the one pictured on the right. Choose the closest size of DEVImat (always rounding down to the nearest size). S...
Typical wiring layout for connection of DEVImat to 540/550 DEVIreg controller.
Examples of DEVImat installation under tiles on a concrete floor. Examples of DEVImat installation under parquet/wood/vinyl on a concrete floor. Examples of DEVImat installati...