DEVIcomfort 150W/m2 DTIR-150 1.0m2 150W Underfloor Heating Mat
Product overview
Manufacturer | DEVI |
---|---|
Range | DEVIcomfort DTIR-150T |
Model | DEVIcomfort DTIR-150T-150W Mat |
Variant | 150 Watts |
Barcode | 5703466169339 |
Weight | 0.77 Kg |
1.0sqm 150watt per sqm heating mat for concrete floors 0.5m wide and 2m long.
DEVIcomfort for Concrete Floors is a thin heating mat specifically designed to be installed within a tile adhesive layer. It evenly warms the floor surface eliminating the cold chill associated with hard floor surfaces. It is ideal for tiles on a concrete floor or parquet on concrete, and can be installed beneath other surfaces such as laminated floors and vinyl.
DEVIcomfort is a prefabricated, self adhesive mat with a thin heating cable ready mounted, all within 3mm thickness. It is an open mesh design allowing the tile adhesive to bond to an existing floor.
The mats are available in a range of sizes from 1-12 square metres. Each mat is 0.5 metres wide. For example, a 5 square metre mat is 0.5m wide and 10m long.
The heat output of this product can be regulated using a controller. Generally only one controller is needed for this product, however, for larger areas, one controller per 23m2 should be used.
Thermostats
There is a choice of wall mounted thermostats, with the most popular being the Devireg Touch.
Applications
This product can be used for Bathrooms/En-Suites and Kitchens. In fact, this system can be used in any room as long as the heating mat is covered by a flexible tile adhesive/self-levelling compound.
Advantages
The luxury of a comfortable warm tiled floor, high standard of comfort, provides even heat across the floor surface, economical, no significant floor height increase, simple to install, guaranteed for 20 years, and gives you a dry floor with no mould.
Technical specifications
Approval | Semko |
---|---|
Area | 1 m² |
Brand | DEVI |
Cable construction | Twin conductor |
Conductor insulation | MFA |
Coverage | 1 |
Mat Length | 2 m |
Mat Type | Concrete Base |
Mat Width | 0.5 m |
No. of Mats | 1 |
Power | 150 W/m² |
Product Type | Mat |
Rated temperature | 120°C |
Rated Voltage | 230 V |
Sheath | PVDF 150watt |
Thickness | 3.0 - 3.5 mm |
Warranty | 20 Years |
Wattage | 150 W |
Product options
Product downloads
Customer reviews
Related articles
List of DEVI Underfloor Heating Mat Resistances
May 12
Concrete Based Floors Single conductor mat. Coverage m2 Normal Minimum -4% Maximum +9% 1.0m 705.00 676.80 768.50 2.0m 353.00 ...
Introduction to DEVI Matting Underfloor Heating
Feb 4
The DEVImat DTIF is a self adhesive mesh, with ultra thin cable pre-attached. It comes in a full range of sizes, from 0.5m-12m and are available in both 100W and 150W per m2 for installation onto b...
How To Install DEVI Matting Underfloor Heating Guide
Sep 11
Follow the step by step instructions below to install your DEVImat system. Example Instruction Step 1 Measure the room and draw a sketch to help you c...
How to Choose your DEVI Matting Underfloor Heating
Jul 21
Start by measuring the free surface area, and make a sketch of the room similar to the one pictured on the right. Choose the closest size of DEVImat (always rounding down to the nearest size). S...
Typical Wiring for DEVI Matting Electrical Connections
Jan 15
Typical wiring layout for connection of DEVImat to 540/550 DEVIreg controller.
Example DEVI Matting Underfloor Heating Floor Constructions
Jan 3
Examples of DEVImat installation under tiles on a concrete floor. Examples of DEVImat installation under parquet/wood/vinyl on a concrete floor. Examples of DEVImat installati...
Frequently asked questions
Are electric underfloor heating systems designed to heat a room or just to keep a floor warm?
Underfloor Heating UK DEVI systems are suitable for both heating the entire room or floor only, depending on your requirements. Poorly insulated areas and in very cold conditions, may require ad...
At what stage of the project should I install my electric underfloor heating?
Generally, we would advise that the property should be airtight before the installation of underfloor heating, but this would also depend on the schedule of your individual project.
Can I install the system myself or do I need an expert?
All of our Underfloor Heating mats come with a full set of installation instructions, providing a simple step by step guide. Most systems can be installed on a DIY basis. But the final electrical c...
Can I retrofit Underfloor Heating into my property?
Installation of underfloor heating is obviously easier within a new build project, but if designed correctly, you can still enjoy the benefits of heating your property using underfloor heat on a re...
Can the backlight in stand-by mode be turned off on the DEVIreg Touch thermostat?
Yes it can. From the main menu, go to Settings > Options > Dim level, and select OFF. With the same navigation, the safety lock, forecast (adaptive function, both start and end), window op...
Can underfloor heating be used in a bathroom or a wet room?
Yes, underfloor heating is a great way to warm your home. It’s lovely to walk on and distributes heat evenly around each corner of the room, freeing your walls from radiators, so its not surp...
Can underfloor heating be used under carpet?
Underfloor heating can be used with most types of carpet. A self-levelling compound is required and as long as the underlay is not a good thermal insulator (i.e not felt), heat will easily pass thr...
Do I need a thermostat?
Yes, we include a DEVIreg Touch programmable thermostat in all of our kits. This stylish cutting edge thermostat uses pulse width modulation with optimum start and optimum end programming as well a...
Do I need to change the flooring when I want to install DEVI floor heating in my bathroom?
An easy and clean solution such as DEVImat gives you possibility to leave an old floor without removing it and creating unnecessary mess. The thought of broken up floors and craftsmen running in an...
How do I turn off my underfloor heating system?
During the summer months or when it is warm, you may wish to turn off your underfloor heating. All of our thermostats have an on/off switch, which can be used to turn off your underfloor heating sy...
I have a floor which is made up of both timber and concrete. Can I use a single heating mat for the floor?
We strongly recommends that each section of floor with a different covering has its own ‘mat’ as well as thermostat since each floor surface has a different maximum temperature limit. W...
What is an underfloor heating floor sensor?
A floor sensor is a device that is connected to the thermostat, and allows the floor temperature to be fully controlled. The floor sensor is wired back to the thermostat, and connected to the &l...
What is the black thing at the far end of the twin conductor mat?
This is the connection at the end of the twin conductor mat where the heating element is connected to the neutral return. This is manufactured within the cable.
Which type of thermostat should I choose for my underfloor heating system?
When choosing a thermostat for your underfloor heating system you need to decide what characteristics you want from your thermostat. Manual - A manual thermostat will provide total control when ...
Will underfloor heating restrict my choice of floor finish?
The correct floor covering should be carefully considered to ensure heat is not prevented from rising into the room by the floor covering. We offer expert advice on floor covering to ensure the bes...