DEVIcomfort 150w/m2 DTIR-150 13.0m2 1950w Underfloor Heating Kit
|Range||DEVIcomfort DTIR 150W Kit|
|Model||DEVIcomfort DTIR-150T-1950W Kit|
The 1950watt mats kit is suitable for covering a 13.0sqm of floor area on a concrete base floor and is ideal for floor warming.
Depending on the preparation of your floor surface the matting may require additional fixing. After years of experience selling and installing DEVIcomfort, we have found the solutions to fixing to most floor surfaces and have included them in the DEVIcomfort kits. The kit sizes above 12 sqm are made up from the two most competitive mats.
Included in the DEVI matting kit
- DEVIreg Touch Thermostat
- Gaffer Utility Tape
- Spray Adhesive
This product can be used for Bathrooms/En-Suites and Kitchens. In fact, this system can be used in any room as long as the heating mat is covered by a flexible tile adhesive/self-levelling compound.
The luxury of a comfortable warm tiled floor, high standard of comfort, provides even heat across the floor surface, economical, no significant floor height increase, simple to install, guaranteed for 20 years, and gives you a dry floor with no mould.
|Cable construction||Twin conductor|
|Mat Length||26 m|
|Mat Width||0.5 m|
|No. of Mats||2|
|Product Type||Mat Kit|
|Rated Voltage||230 V|
Follow the step by step instructions below to install your DEVImat system. Example Instruction Step 1 Measure the room and draw a sketch to help you c...
Start by measuring the free surface area, and make a sketch of the room similar to the one pictured on the right. Choose the closest size of DEVImat (always rounding down to the nearest size). S...
Typical wiring layout for connection of DEVImat to 540/550 DEVIreg controller.
Examples of DEVImat installation under tiles on a concrete floor. Examples of DEVImat installation under parquet/wood/vinyl on a concrete floor. Examples of DEVImat installati...
Frequently asked questions
Underfloor Heating UK DEVI systems are suitable for both heating the entire room or floor only, depending on your requirements. Poorly insulated areas and in very cold conditions, may require ad...
Generally, we would advise that the property should be airtight before the installation of underfloor heating, but this would also depend on the schedule of your individual project.
All of our Underfloor Heating mats come with a full set of installation instructions, providing a simple step by step guide. Most systems can be installed on a DIY basis. But the final electrical c...
Installation of underfloor heating is obviously easier within a new build project, but if designed correctly, you can still enjoy the benefits of heating your property using underfloor heat on a re...
Yes, underfloor heating is a great way to warm your home. It’s lovely to walk on and distributes heat evenly around each corner of the room, freeing your walls from radiators, so its not surp...
Underfloor heating can be used with most types of carpet. A self-levelling compound is required and as long as the underlay is not a good thermal insulator (i.e not felt), heat will easily pass thr...
Yes, we include a DEVIreg Touch programmable thermostat in all of our kits. This stylish cutting edge thermostat uses pulse width modulation with optimum start and optimum end programming as well a...
An easy and clean solution such as DEVImat gives you possibility to leave an old floor without removing it and creating unnecessary mess. The thought of broken up floors and craftsmen running in an...
During the summer months or when it is warm, you may wish to turn off your underfloor heating. All of our thermostats have an on/off switch, which can be used to turn off your underfloor heating sy...
I have a floor which is made up of both timber and concrete. Can I use a single heating mat for the floor?
We strongly recommends that each section of floor with a different covering has its own ‘mat’ as well as thermostat since each floor surface has a different maximum temperature limit. W...
This is the connection at the end of the twin conductor mat where the heating element is connected to the neutral return. This is manufactured within the cable.
The correct floor covering should be carefully considered to ensure heat is not prevented from rising into the room by the floor covering. We offer expert advice on floor covering to ensure the bes...