DEVImat 200W/m² DTIF-200 1.45m² 290W Underfloor Heating Mat
Product overview
Barcode | 5703466196007 |
---|---|
Weight | 1.50 Kg |
1.45m2 200watt per sqm heating mat for concrete base floors 0.5m wide and 2.90m long.
Excellent when there is great demand for rapid response time and high output. High output per m² resulting in instant warmth gives the DTIF-200 a number of possible uses:.
Devimat is a prefabricated, self adhesive mat with a thin heating cable ready mounted, all within 4mm thickness. It is an open mesh design allowing the tile adhesive to bond to an existing floor.
The mats are available in a range of sizes from 1.05-10.5 square metres. Each mat is 0.5 metres wide.
The heat output of this product can be regulated using a controller. Generally only one controller is needed for this product, however, for larger areas, one controller per 17m2 should be used.
Thermostats
There is a choice of wall mounted thermostats, with the most popular being the Devireg Touch.
Applications
This product can be used for Bathrooms/En-Suites and Kitchens. In fact, this system can be used in any room as long as the heating mat is covered by a flexible tile adhesive/self-levelling compound.
Advantages
The luxury of a comfortable warm tiled floor, high standard of comfort, provides even heat across the floor surface, economical, no significant floor height increase, simple to install, guaranteed for 20 years, and gives you a dry floor with no mould.
Technical specifications
Approval | IEC60335-2-9 |
---|---|
Area | 1.45 m² |
Brand | DEVI |
Cable construction | Twin conductor |
Conductor insulation | FEP/PVDF |
Mat Length | 2.9 m |
Mat Type | High Output |
Mat Width | 0.5 m |
No. of Mats | 1 |
Power | 200 W/m² |
Product Type | Mat |
Rated temperature | 70°C |
Rated Voltage | 230 V |
Thermostat Choice | Mat Only |
Thickness | 3-3.5 mm |
Warranty | 20 Years |
Wattage | 290 W |
Product options
Related articles
List of DEVI Underfloor Heating Mat Resistances
May 12
Concrete Based Floors Single conductor mat. Coverage m2 Normal Minimum -4% Maximum +9% 1.0m 705.00 676.80 768.50 2.0m 353.00 ...
Introduction to DEVI Matting Underfloor Heating
Feb 4
The DEVImat DTIF is a self adhesive mesh, with ultra thin cable pre-attached. It comes in a full range of sizes, from 0.5m-12m and are available in both 100W and 150W per m2 for installation onto b...
How To Install DEVI Matting Underfloor Heating Guide
Sep 11
Follow the step by step instructions below to install your DEVImat system. Example Instruction Step 1 Measure the room and draw a sketch to help you c...
How to Choose your DEVI Matting Underfloor Heating
Jul 21
Start by measuring the free surface area, and make a sketch of the room similar to the one pictured on the right. Choose the closest size of DEVImat (always rounding down to the nearest size). S...
Typical Wiring for DEVI Matting Electrical Connections
Jan 15
Typical wiring layout for connection of DEVImat to 540/550 DEVIreg controller.
Example DEVI Matting Underfloor Heating Floor Constructions
Jan 3
Examples of DEVImat installation under tiles on a concrete floor. Examples of DEVImat installation under parquet/wood/vinyl on a concrete floor. Examples of DEVImat installati...