DEVImat 200w/m² DTIF-200 2.10m² 430w Underfloor Heating Kit
2.10m² 200watt per sqm heating mat for High Output 0.5m wide and 4.20m long.
Excellent when there is great demand for rapid response time and high output. High output per m² resulting in instant warmth gives the DTIF-200 a number of possible uses.
- Devimat is a prefabricated, self-adhesive mat with a thin heating cable ready mounted
- 4mm thickness
- Open mesh design allowing the tile adhesive to bond to an existing floor
- Available in a range of sizes from 1.05-10.5 square metres
- Mat width is 0.5 metres
- The heat output of this product can be regulated using a controller. Generally only one controller is required however, for larger areas, one controller per 17m² should be used.
This product can be used for bathrooms/en-suites and kitchens. In fact, this system can be used in any room as long as the heating mat is covered by a flexible tile adhesive/self-levelling compound.
The luxury of a comfortable warm tiled floor, high standard of comfort, provides even heat across the floor surface, economical, no significant floor height increase, simple to install, guaranteed for 20 years, and gives you a dry floor with no mould.
|Cable construction||Twin conductor|
|Mat Length||4.2 m|
|Mat Type||High Output|
|Mat Width||0.5 m|
|No. of Mats||1|
|Product Type||Mat Kit|
|Rated Voltage||230 V|
|Thermostat Choice||DEVIreg Touch - Pure White|
Follow the step by step instructions below to install your DEVImat system. Example Instruction Step 1 Measure the room and draw a sketch to help you c...
Start by measuring the free surface area, and make a sketch of the room similar to the one pictured on the right. Choose the closest size of DEVImat (always rounding down to the nearest size). S...
Typical wiring layout for connection of DEVImat to 540/550 DEVIreg controller.
Examples of DEVImat installation under tiles on a concrete floor. Examples of DEVImat installation under parquet/wood/vinyl on a concrete floor. Examples of DEVImat installati...