|Model||DEVIbasic DSIG-20 4565W|
DSIG-20 single conductor heating cable is a 20watt linear metre cable used to install within a sand and cement screed for providing underfloor heating in houses, flats, offices, public buildings, factories, schools, and nursing homes. The cable is simply fixed to the floor using the devifast fixing strip ensuring both even spacing and even heat across the floor. The heating cable can be controlled by any of the thermostats we stock.
|Cable construction||Single conductor|
|Cable Length||228 m|
|Product Type||In-Screed Cable|
|Rated Voltage||230/240 V|
We make every effort in answering your questions. Below is a list of those questions we are frequently asked. Click on a question to expand its answer.
All of our Underfloor Heating mats come with a full set of installation instructions, providing a simple step by step guide. Most systems can be installed on a DIY basis. But the final electrical c...
Underfloor Heating UK DEVI systems are suitable for both heating the entire room or floor only, depending on your requirements. Poorly insulated areas and in very cold conditions, may require ad...
Yes, underfloor heating is a great way to warm your home. It’s lovely to walk on and distributes heat evenly around each corner of the room, freeing your walls from radiators, so its not surp...
Yes, we include a DEVIreg Touch programmable thermostat in all of our kits. This stylish cutting edge thermostat uses pulse width modulation with optimum start and optimum end programming as well a...
The correct floor covering should be carefully considered to ensure heat is not prevented from rising into the room by the floor covering. We offer expert advice on floor covering to ensure the bes...
Installation of underfloor heating is obviously easier within a new build project, but if designed correctly, you can still enjoy the benefits of heating your property using underfloor heat on a re...
Generally, we would advise that the property should be airtight before the installation of underfloor heating, but this would also depend on the schedule of your individual project.
Underfloor heating can be used with most types of carpet. A self-levelling compound is required and as long as the underlay is not a good thermal insulator (i.e not felt), heat will easily pass thr...