DEVIcomfort 100w/m² DTIR-100 2.5m² 250W Underfloor Heating Kit
The 250watt mat kit is suitable for covering a 2.5sqm of floor area on a Timber base floor and is ideal for floor warming.
Depending on the preparation of your floor surface the matting may require additional fixing. After years of experience selling and installing DEVIcomfort, we have found the solutions to fixing to most floor surfaces and have included them in the DEVIcomfort kits. The kit sizes above 12 sqm are made up from the two most competitive mats.
Included in the DEVI matting kit
- Gaffer Utility Tape
- Spray Adhesive
- DEVIreg Touch black programmable thermostat
This product can be used for Bathrooms/En-Suites and Kitchens. In fact, this system can be used in any room as long as the heating mat is covered by a flexible tile adhesive/self-levelling compound.
The luxury of a comfortable warm tiled floor, high standard of comfort, provides even heat across the floor surface, economical, no significant floor height increase, simple to install, guaranteed for 20 years, and gives you a dry floor with no mould.
|Cable construction||Twin conductor|
|Mat Length||5 m|
|Mat Type||Timber Base|
|Mat Width||0.5 m|
|Model||DEVIcomfort 100w/m² 2.5m²|
|No. of Mats||1|
|Product Type||Mat Kit|
|Rated Voltage||230 V|
|Thermostat Choice||DEVIreg Touch - Black|
Ratings based on data collected by third party reviewing platform.
24 May 2018 12:33
As in section 1 lack of installation information.
Mat does not appear to be as sticky as a previous product
Your service was quick and efficient. My concern was with the DEVI product information and installation information. I have previously fitted a DEVI mat however the installation information was minimal and no explanation given for the pack content. Fortunately I remembered most of the installation steps. The one that I didn't was answered by DEVI customer help. My point is that the product is good but the installation information is poor as is the online information. If DEVI ask you can feed back this information to them.
Follow the step by step instructions below to install your DEVImat system. Example Instruction Step 1 Measure the room and draw a sketch to help you c...
Start by measuring the free surface area, and make a sketch of the room similar to the one pictured on the right. Choose the closest size of DEVImat (always rounding down to the nearest size). S...
Typical wiring layout for connection of DEVImat to 540/550 DEVIreg controller.
Examples of DEVImat installation under tiles on a concrete floor. Examples of DEVImat installation under parquet/wood/vinyl on a concrete floor. Examples of DEVImat installati...
Spread the Cost
with our flexible finance plans
- No deposit required
- Choice of simple payment options
- Easy, quick application
- Instant decision